Botron’s ESD Heel Grounders not only are ESDA Compliant (Step 1) but they provide industry leading surface contact for an incredibly reliable path to ground. We recommend each operator dress with two heel grounders, one for each foot. This will create a parallel path to ground when standing (two feet down) and provide additional peace of mind when walking about, as one heel grounder will always remain in contact with the grounding surface i.e. ESD floor.

Botron’s ESD Heel Grounders come standard with a conductive 18″ ribbon. All resistors are built-in and are available in 1 MegaOhm, 2 MegaOhm or no resistor variations.

Cup Design: 1.5” x 7.5” Two Layer Rubber

Interior: Non-Marking Rubber

Exterior: Conductive Rubber 5x10³

Ribbon: 18” Conductive Nylon

Charge Decay: <0.01 second

Thickness: 0.08"

Resistor: 1 MegaOhm, 2 MegaOhm, No Resistor

RTG: Resistance to Ground

• 1 MegaOhm - 1.1x10⁶
• 2 MegaOhm - 2.2x10⁶

Fastening System: 3/4" x 7” Stretch Hook & Loop

Standards: Meets or exceeds any one or combination of the following: ANSI/ESD STM9.1, ESD SP9.2, ESD TR53, ANSI/ESD STM97.1-2

Color: Blue, Black, Day-Glow Yellow