• Measures in several different units: m/s, knots, km//h, mph, ft/min
• Measurement memory for up to 60,000 values
• Configuration and evaluation on PC via software
• Direct-reacting, smooth-running impeller
• Threaded hole on the device
• Alarm when limit value exceeded
• USB interface
• Recording intervals: 3 seconds, 5 seconds, 10 seconds, 30 seconds, 1 min, 5 mins, 10 mins, 30 mins, 1 hour, 2 hours, 3 hours, 6 hours, 12 hours
• Measuring modes: Automatic and manual start of the measurement

The PCE-ADL 11 Anemometer is a data logger for wind speeds. The configuration on the wind measuring device is carried out via the supplied software and provides multiple settings for measurement. The wind meter measures various parameters. These include m / sec, km / h, knots, mph, and ft/min. In addition to the measurement parameters, the measurement intervals can be set on the software by the wind measuring device. The data logger function accommodates 60,000 measured values. After completing the series of measurements, the data from the wind gauge can be read out on the computer via the software. The measurement results are displayed as either graphically as a curve or in tabular form.

The impeller installed on the wind gauge already responds to low flow velocities. In this case, the wind meter can be fixed by means of a mounting device. There is a threaded hole on the bottom of the wind gauge, so you can attach the unit firmly to the mounting bracket.

What's in the Box

• 1x Anemometer PCE-ADL 11
• 1x Mounting Device
• 1 x Software
• 1x Impeller
• 1x Test Block
• 1x 3.6V lithium thionyl chloride Battery
• 1x User Manual