Uni-T UT8803E Benchtop Digital Multimeter

Features and Specifications

• Reading resolution: 3.8 Digit Display, 5,999 Counts
• Auto-Ranging
• 0.03% Accuracy
• DC voltage range：600mV - 1000V
• DC current range：600µA - 20A
• AC voltage range：600mV - 750V（True-RMS）
• AC current range：600µA - 20A （True-RMS）
• Resistance range：600 ohm - 60 megohm
• Capacitance range：6nF - 60mF
• Inductance range：600µH - 100H
• Frequency measurement range：600Hz - 20MHz
• Duty cycle measurement range：5% - 95%
• Mathematical operation: maximum, minimum, relative value, trend chart
• Interface: USB
• Frequency response: 100KHz
• Data record: 20000 groups
• Measure triode and thyristor
• Support global mains voltage

UT8803E Overview

Uni-T's UT8803E is a high-performance, AC-powered digital multimeter. It's a portable desktop device with a large, backlit screen that makes it easy to read. The device is designed with full function testing, full range overload protection, and a unique appearance. It can measure a variety of parameters including AC/DC voltage, AC/DC current, resistance, frequency, capacitance, inductance, triode HFE, diode (LED), thyristor (SCR), and circuit on-off, making it a multifunctional, high-precision, and automated solution for users' measurement needs.

The device can display 3.8 digits (6000), providing high-precision and superiorly accurate results. Its simulation bar enhances the intuitiveness of the measurement results display. It can also measure D/Q parameters of capacitance and inductance. By pressing the EQR key during capacitance or inductance measurement, users can switch and view the measured value of parameters.

It also features an inductance test function. By switching to the I option and cooperating with Q/R value measurement, the device can better calibrate the measured inductance. Additionally, with the help of UT-S03A, the UT8803E can measure the magnification, conduction direction, and conduction voltage of triodes and thyristors. This feature can assist users in screening good products.

The UT8803E also has a maximum and minimum value statistics function, which can help users find out the maximum output and the minimum output in batch products or multiple measurements. Users can press the REL button to set the test reference value according to the error or deviation of the measured items, and then see the calculation result relative to the reference value on the display.

When you need to take your data off-site, the UT8803E can be connected to a computer for remote operation. After installing the driver software, users can remotely view and control the device, and observe historical data and trend charts in real time.

UT8803E Multimeter Panel Features

UT8000E Series of Digital Multimeters

The Uni-T UT8000E Series of DMMs are a must-have for electrical engineers who prioritize accuracy, flexibility, and ease in their measurements. Boost your testing potential and guarantee the success of your projects. This series includes five models, catering to a spectrum of needs from basic value to advanced, and all points in between where precision is paramount. These DMMs are suitable for an extensive array of electrical engineering applications, enabling you to handle a variety of tasks effortlessly. Models are:

• Value-Series
  • UT8802E - 4.5 Digit Display, Manual Ranging, 19,999 Counts, 0.1% Accuracy
• Classic-Series
  • UT8803E - 3.8 Digit Display, Auto-Ranging, TRMS, 5,999 Counts, 0.03% Accuracy
• Advanced-Series
  • UT8804E - 4.8 Digit Display, Auto-Ranging, TRMS, 59,999 Counts, 0.025% Accuracy
• Performance-Series
  • UT8805E - 5.5 Digit Display, Auto-Ranging, TRMS, 199,999 Counts, 0.015% Accuracy
  • UT8806E - 6.5 Digit Display, Auto-Ranging, TRMS, 1,999,999 Counts, 0.0035% Accuracy

What's in the Box

• UT8803E Digital Multimeter
• UT-L41 test lead: Alligator clip short test lead:110-130mm
• UT-T01 K-type temperature probe: Temperature probe, flat plug-in point thin wire 1000 K type
• UT-S03A: Auxiliary test fixture for triode thyristor
• Power cable: Fits the standard of destination country
• UT30(CE) test probe: Test leads, double insulated wire CATIII 1000V /CATIV 600V 10A
• USB data cable: USB standard printer cable length 1m (RoHS)