Uni-T UT8804E Benchtop Digital Multimeter

Features and Specifications

• Reading resolution: 4 5/6, maximum reading 59999
• Auto Ranging
• DC voltage range: 60mV - 1000V
• DC current range: 600pA - 20A
• AC voltage range: 60mV - 1000V (True-RMS)
• AC current range: 600pA - 20A (True-RMS)
• Resistance range: 600Q - 60MQ
• Capacitance range: 6nF - 60mF
• Conductivity range: 60ns
• Frequency measurement range: 60Hz - 60MHz
• Duty cycle measurement range: 10% - 90%
• Mathematical operation: maximum, minimum, average, peak, comparative measurement, trend chart
• Interface: USB
• Frequency response: 100 KHz
• Data record: 20000 groups
• LPF low pass filter function
• Support global mains voltage
• Remote Operation

UT8804E Overview

Uni-T's UT8804E is a high-performance benchtop digital multimeter (DMM) with auto range, color display, and true RMS measurement functions. It's designed with large scale integrated circuit A/D conversion, microprocessor, multifunction measurement, and high stable thin-film resistor manufacturing technology. This allows it to measure a wide range of parameters including AC/DC voltage, AC/DC current, resistance, conductance, diode, continuity, capacitance, temperature, frequency, pulse width, and more.

The device also includes data hold, max/min/average value measurement, comparison function measurement, relative value measurement, peak detection, tendency chart capture, and up to 20000 data recording/readback functions. The integrated 4.3-inch color display provides multi-level, comprehensive measurement results with both readings and tendency charts for easy interpretation.

The UT8804E can display 4 5/6 digits (59999), providing high-precision and accurate result display. Its simulation bar makes the display of measurement results more intuitive. The device also includes a comparison function that can automatically identify unqualified devices in a batch test and give an alarm.

The device also has a maximum and minimum value statistics function that can help you find out the maximum output, the minimum output, and the average value. It can also give the time when the extreme value appears and the total measurement time slot. This statistical method is applicable to all testable items such as voltage, current, resistance, and capacitance.

For each test item, multiple test parameters can be selected to meet your test requirements. Additional secondary parameters can be added to make the measurement more specific, while displaying the main parameters. The device also includes a reference value mode where you can set the test reference value according to the error or deviation of the measured items. Then you can see the calculation result relative to the reference value on the display. The reference value and original measured value are also displayed for reference.

In addition to the data saving function, the device also has a recording function where you can record all the measured data captured in the test according to the measurement needs. During the recording process, the device will show that the recording is in progress, and will display the number of samples, recording duration, extreme value, average value, and other information.

The recorded data record will have full-time statistical data and an intuitive trend chart when looking back, which is convenient for you to check the abnormal data in the time slot. The value at a certain time point can also be obtained by adjusting the cursor in the trend chart.

When you need to take your data off-site, the UT8804E can be connected to a computer for remote operation. After installing the driver software, users can remotely view and control the device, and observe historical data and trend charts in real time. This makes the UT8804E a versatile and reliable tool for a wide range of measurement tasks.

UT8804E Multimeter Panel Features

UT8000E Series of Digital Multimeters

The Uni-T UT8000E Series of DMMs are a must-have for electrical engineers who prioritize accuracy, flexibility, and ease in their measurements. Boost your testing potential and guarantee the success of your projects. This series includes five models, catering to a spectrum of needs from basic value to advanced, and all points in between where precision is paramount. These DMMs are suitable for an extensive array of electrical engineering applications, enabling you to handle a variety of tasks effortlessly. Models are:

• Value-Series
  • UT8802E - 4.5 Digit Display, Manual Ranging, 19,999 Counts, 0.1% Accuracy
• Classic-Series
  • UT8803E - 3.8 Digit Display, Auto-Ranging, TRMS, 5,999 Counts, 0.03% Accuracy
• Advanced-Series
  • UT8804E - 4.8 Digit Display, Auto-Ranging, TRMS, 59,999 Counts, 0.025% Accuracy
• Performance-Series
  • UT8805E - 5.5 Digit Display, Auto-Ranging, TRMS, 199,999 Counts, 0.015% Accuracy
  • UT8806E - 6.5 Digit Display, Auto-Ranging, TRMS, 1,999,999 Counts, 0.0035% Accuracy

What's in the Box

• UT8804E Digital Multimeter
• Power cord
• USB printing cable
• UT-L41 alligator clip short test cable
• Multimeter test leads
• K-type thermocouple
• Adapter socket UT-S04A