GPS-3030DD Programmable and Single Output Linear DC Power Supply, GPS Series

• 0-30 Volts, 0-3 Amps
• Constant Voltage, Constant Current
• Separate Digital Voltmeter and Ammeter
• Coarse and Fine Controls for Voltage and Current
• Light and Compact Design
• 0.01% Regulation
• Low Ripple and Noise
• Overload and Reverse Polarity Protection
• Series or Parallel Operation with Connection for Tracking
• Remote Control by External Voltage (common to + output terminal)
• 2-Year Warranty
• The GPS-Series Power Supply includes both analog and digital display meters with varying power outputs.
• Features overload and reverse polarity protection as well as high regulation and low ripple/noise that are maintained at 0.01% and < 1mVrms, respectively.
• Continuous or dynamic internal load selection accommodates applications such as pulsed current. Remote control terminals offer programming and operation from an external device.

GW Instek's regulated DC power supply has been designed to provide the most often required in the laboratory, schools, and production lines. The output voltage is continuously adjustable between 0 to rating voltage in one range by means of a coarse and fine potentiometer, the load current may have any value from 0 to rating current and adjusted by means of a coarse and fine potentiometer. Both outputs can accurately read in voltmeter and ammeter.

Both stability and ripple are extremely good to meet the requirements of modern circuit design. The unit can be used as either a constant voltage or a current source.

• For applications when output greater than V or A is a need, the unit can be connected up in a series or parallel.
• For applications in audio production lines, the continuous or dynamic load internal selectable.

The GPS Series are single output, linear DC power supplies. Overload and reverse polarity protection keep the GPS-Series and its loads safe from unexpected conditions. High regulation and low ripple/noise are maintained at 0.01% and <1 mVrms, respectively. Internal load selection, continuous or dynamic, accommodates applications such as pulsed current. Remote control terminals offer programming and operation from an external device.

In The Box

• User Manual x 1
• Power Cord x 1
• GTL-105A Test Lead
• GTL-105*1 (≤3A) ot GTL-104*1 (≤10A)
• GTL-203*1 (≤3A) or GTL-204*1 (≤10A) European Test Lead