Desco 19239 Mini Continuous Monitor with North American Plug

Continuously Monitors the Path-to-Ground Integrity of One Operator and One ESD Worksurface

Manufacturer Model Number:	19239
Part Number:	548MU471
Former Part Number:	487-268
Shipping Weight:	1.33 pounds

Your Price:

$147.52

Availability: Currently 68 in stock. Ships same day if ordered by 4 p.m. Eastern Time.

Product Features

Wave distortion technology
Park snap with wave distortion technology
1.2 Volt operator test voltage
<50 millisecond alarm response time
Continuous visual and audible alarms
NIST calibrated with certificate included
Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0

Product Description

This mini monitor is a single workstation continuous monitor. It continuously monitors the path-to-ground integrity of one operator and one ESD worksurface.< The monitor eliminates the need for periodic testing and record keeping of wrist straps. Designed with Wave Distortion Technology which provides stable continuous monitoring of the path-to-ground and presence of 1 megohm resistance of an operator’s wrist strap. Audio and visual alarms activate (in less than 50 milliseconds) when the operator unintentionally disconnects from the monitor or the wrist strap connection points are intermittent. The monitor also serves as a ground point for an ESD worksurface and monitors for a path-to-ground of less than 500 megohms. Comes calibrated to NIST standards and include a certificate. •Fail low alarm - all standard wrist strap testers include a fail low setting. This is important for operator safety. If the wrist strap is missing a resistor or has a defective resistor, the operator will be in effect plugging directly into hard ground (the resistance of the monitor is only 40K ohms). Using a monitor like the Desco 19239 / 19242 keeps your operators safe and your companyâ€™s liability to a minimum.

•Parking snap - allows you to keep the coiled cord at the monitor which helps prevent cord from getting lost, prevents cords from wearing out (a cord should not have to be unplugged once itâ€™s in the monitor and parked). Youâ€™ll need to buy fewer cords, saving you money and should allow you to use less expensive cords due to less wear and tear on the banana plug and the strain relief.

Desco Mini Continuous Monitor Technical Data Sheet

AccessoriesSpecificationsKit ContentsReplacement Parts

Desco 09100 Jewel® Adjustable Wrist Strap with 6 ft. Cord, Sapphire Blue In stock $23.91	Desco 98221 Calibration Verification Checker Special order $727.05

Desco 09100 Jewel® Adjustable Wrist Strap with 6 ft. Cord, Sapphire Blue

In stock

$23.91

Desco 98221 Calibration Verification Checker

Special order

$727.05

Certificate of Calibration:	Yes
Color:	Black
Features:	Wave Distortion Technology is the Most Reliable Technology for Continuous Monitoring of Single-Wire (Conductor) Wrist Straps "Wave Distortion" or vector impedance works by applying a continuous test voltage of 1.2 volts peak-to-peak at 1 to 2 microamperes (0.000002 amperes) to the wrist strap that is connected to the continuous or constant monitor. The test voltage creates a sine wave that the monitor circuit compares to established patterns. By monitoring the "distortions", or shape of the sine wave, Wave Distortion Technology determines if the monitored circuit is complete - the operator is in the circuit and the total equivalent DC resistance is within specifications. Wave Distortion Technology produces a very fast alarm time (<50 milliseconds) and minimal false alarms.
Includes:	1 Mini Monitor, 2 Push and Clinch Snaps, 1 Power Adapter, 24VDC, 1 Certificate of Calibration
Note:	The worksurface mat must have a conductive layer such as Dual Layer Rubber or Dissipative 3-Layer Vinyl with conductive buried layers. Desco workstation monitors are not recommended for use with homogeneous matting. Use single wire wrist straps only.
Number of Operators:	1
Size:	2.77" L x 2.08" W x .90" H