• As easy to use as a lawn mower.
• Self-feeds 8 and 10 ft. cable sections as far as 200 ft. into the line.
• Cables snap together in seconds.
• Adjustable safety clutch protects cables and operator.
• 3/4 hp motor drives 3.5 to 1 gear reducer.
• Pneumatic foot switch and ground fault interrupter.
• Folding handle and 10" tires for easier handling.
• Made in U.S.A.

The Model 88 is almost as easy to run as a lawnmower. You push eight- or ten-foot cable sections into the line until you reach some resistance. Then attach the rear cable coupling to the machine, stand behind it, and turn it on. Watch the cable feed itself into the line. When a section has run into the drain, attach another one and keep going. This self-feeding feature also works to pull sections out of the line.

The Model 88 handles jobs up to 200 ft. long in lines from 3" to 10" diameter. A standard 3/4 hp capacitor motor supplies plenty of power, and an adjustable safety clutch protects cables and operator.

Sections come in two styles: all-purpose Flexichain, which has a chain center, and the stiffer Proflex, which has a spring center. A chain assures easier cable retrieving if the Flexichain spring should break. The inner spring in the Proflex gives it greater stiffness, which is desirable for long or tough jobs. The outer spring is right-hand wound for faster self-feeding.

Cable sections snap together in a second and are taken apart quickly with a spanner wrench or screwdriver. With the newer "G" connector, no tension is on the locking pin when running in reverse, making it a more durable coupling. Snap on the optional 78L-CDC adapter and you can use 6 ft. x 7/8" cables (6L78) to clear smaller lines.