JensenTools
Dwyer

Dwyer 160-120 Pitot Tube, Stainless Steel, 90 Deg, 5/16" Dia, 120" Insertion Length, 160 Series

Our Part #10145813

Mfr Part #160-120

Dwyer 160-120
Dwyer

Dwyer 160-120 Pitot Tube, Stainless Steel, 90 Deg, 5/16" Dia, 120" Insertion Length, 160 Series

Our Part #10145813

Mfr Part #160-120

$840.80EACH
  • Stainless Steel Pitot tube,
  • 90 degree bend, 5/16" dia., 120" insertion length
  • No calibration needed.
  • Precisely located, burr-free static pressure holes.
  • Hemispherical tip design, best for accuracy if imperfectly aligned and nearly impossible to damage.
  • Long lasting 304 stainless steel construction.
  • Silver soldered connections for leak-proof operation.

Dwyer 160 Series Pitot Tubes

The Dwyer 160-120 stainless steel pitot tubes 160 Series are designed for use with differential pressure transmitters, manometers, or air velocity gauges to measure air flow in ducts. See Measuring Air Flow in the Technical Reference Section for complete application information.

The 160 Series is designed per ASME and meets AMCA and ASHRAE standards. Insertion depth is stamped on the side of the pitot tubes, and the static pressure port is parallel to the sensing tube to allow easy alignment with air flow. A Model A-158 split flange mounting kit allows for simple, leak-free mounting of the 160 Series.

The Series 160 Stainless Steel Pitot Tube is constructed from corrosion resistant stainless steel with permanently etched insertion depth graduations for a lifetime of service. The static pressure port is parallel to the sensing tube to allow quick, easy alignment of the tube with air flow. A universal model fits the user supplied 3/4" schedule 40 pipe in any length.

Ideal for use with our precision manometers and air velocity gages, Dwyer® Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration!

Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when the tube is misaligned up to 15 degrees.

Various standard sizes are available for use in ducts as small as 4" dia, or as large as 36 ft dia. A universal model fits user supplied 3/4" schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

Stainless Steel Pitot tube, 90 degree bend, 5/16" dia., 120" insertion length No calibration needed. Precisely located, burr-free static pressure holes. Hemispherical tip design, best for accuracy if imperfectly aligned and nearly impossible to damage. Long lasting 304 stainless steel construction. Silver soldered connections for leak-proof operation.


Brand: Dwyer
Series: 160 Series
Angle: 90 Deg.
For Use With: Differential Pressure Transmitters, Manometers, Air Velocity Gauges
$840.80EACH