• Power meter with 3x 3000A flexible clamps (PCE-3007)
• Electrical conductor pick-up: 170 mm diameter
• Minimal radial curve: 35mm
• Analysis of a network of 3 phases / 4 conductors, 3 phases / 3 conductors, 1 phase / 2 conductors, 1 phase / 3 conductors
• AC current measurement with PCE-6802: 0 – 3000 A
• Measures effective real value, active power, apparent and reactive power, Power Factor, phase angle, energy and work
• 512 KB of memory with programmable intervals to save data every 2 to 3000 seconds, 17,470 readings using the system of 3 phases / 4 conductors
• Indicates wave forms, efficiency parameters, and harmonic distortion
• Backlit LCD with dot matrix
• Average power, Maximum power with the programmable period

The PCE-830 Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This Power Analyzer also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetries. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The backlit LCD, with high resolution, can show up to 35 parameters simultaneously. Up to 3 clips can be attached at the same time to the Power Analyzer.

In data logger mode, it can save up to 17,470 readings (3 phases / 4 conductors), in a simpler setup (1 phase / 2 conductors) it can save up to 52,400 readings, split into 85 groups. All this makes the PCE-830 Power Analyzer the ideal instrument for taking measurements over long durations. Measurement values obtained can be sent to a computer and processed with the included analysis software. The device comes with everything needed to be measured and analyzed from the moment it arrives. Although the Power Analyzer comes calibrated from the manufacturer, an optional laboratory calibration and certificate, that meets ISO standards, can be ordered separately with the device or when a recalibration is required.

What's in the Box

• 1x PCE-830-3 Power Analyzer
• 3x Amp clamps - PCE-3007
• 4x Alligator clips
• 4x Safety Test lines (3 m / 3.3 ft long)
• 8x Batteries
• 1x Mains Adaptor
• 1x Carrying Case
• 1x USB Cable Software
• 1x User Manual