Uni-T UDP1306C Linear DC Power Supply

Features and Specifications

• Channels: 1Ch
• Max V DC: 32VDC
• Max A DC: 6A
• Watts: 202W
• Max V Resolution: 10mV
• Max A Resolution: 1mA
• Accuracy: < 0.5%+20mV/< 0.5%+10mA
• Programmable
• AC input voltage: 110V/120V/220V/230V, 50/60Hz
• Intelleigent Cooling Fan
• Interfaces: USB, RS232
• 5 Sets of Data Storage
• OVP, OCP, OTP Protection

UDP1306C Overview

Meet the UDP1306C DC power supply, a versatile tool designed to cater to your diverse power needs. It provides two sets of independent outputs. The first is an adjustable output of 32V/6A that operates in both constant voltage (CV) and constant current (CC) modes. The second is a fixed output of 5V/2A, fortified with protection against short circuits and overvoltage.

The UDP1306C is designed with user safety in mind. Users can set limits for over-voltage, over-current, and over-temperature protection. In the event of an over-voltage or over-current situation, or if the internal heat sink reaches approximately 212 F (100 C), the power supply will automatically shut down the output and provide a prompt message to the user.

For ease of use during testing, the UDP1306C features M1-M5, five groups of stored values. A long press stores the values, while a short press recalls them, making it a convenient tool for test work.

The power supply also comes equipped with a remote control digital I/O interface, allowing for remote control of the output and shutdown of the power supply channel. It also includes an RS-232 interface and a USB Device port. Based on the SCPI communication command, it can communicate with a computer, offering you seamless control and integration with your existing setup.

UDP1306C DC Power Supply Panel

Front Panel

1. Ch1 output voltage adjustment knob
2. M1-M5 data storage button
3. CH1 output current adjustment knob
4. Buzzer switch
5. Keypad lock
6. OUTPUT button
7. Channel CV/CC indicator (green-CV, red-CC)
8. Green channel binding post (ground)
9. Black channel binding post (negative)
10. Red channel binding post (positive)
11. Mobile phone charging USB interface (5V/2A)
12. Power switch
13. Output power
14. Current
15. Voltage
16. Product model: UDP1306C

Rear Panel

1. Remote control switch:
   • To remotely control the output and shutoff of CH1, you can short-circuit or disconnect the pin 1 and 2 of the DIGITAL I/O terminal by a short-circuited wire or an external relay.
2. USB Device communication interface
3. RS232 communication interface:
   • UDP1306C power supply supports the communication between RS232 interface and the computer base on SCPI communication instruction, please refer to the programming manual for detail.
4. Power supply interface
5. Voltage selector:
   • AC input voltage includes 100V/120V/220V/230V +/-10%, 50/60Hz. You can select different input voltages through the "AC SELECTOR" on the rear panel according to actual needs, please disconnect the power connection before switching the input voltage.
6. Power supply louver

What's in the Box

• UDP1306C DC Power Supply
• USB Cable
• Output Cables
• Power Cord