FLK-II915/SB140/FPC Acoustic Imager w/ Sound Beacon, 1-Yr Premium Care

SB140 Sound Beacon

The Fluke SB140 Sound Beacon is specifically crafted for applications requiring precision in detecting tightness and is designed to be used alongside Fluke acoustic imagers. It emits ultrasound at a frequency of 40 kHz, which travels through the air with minimal loss. This enables sound within an enclosed area to escape through a leak pathway and be captured by the Fluke camera for visualization. The Fluke acoustic imagers are highly sensitive to the SB140’s ultrasound frequency, allowing potential leak locations to be visually displayed on the screen. Using the imager in "Beacon Mode" simplifies the process even further, as the frequency filter is preset and focused on 40 kHz.

SB140 Beacon Features and Specifications

• Sound frequency 40 kHz ± 1.5 kHz
• Controls on/off switch
• Relative humidity 10 to 95 %, non-condensing
• Ingress protection (IP) IEC 60529: IP40
• Housing Extruded Aluminum
• Battery life > 300 hours
• Power supply 9-volt alkaline (included)

Applications

• Automotive - Window and door seals
• Aviation - Aircraft gas tanks, window or door seal, pitot-static system
• Clean Rooms - Seal/Tightness test
• Appliances - Refrigerators/Wash Machine/Dishwasher door sealing
• Maritime - Vessel seal, Cargo access areas, Shipping Containers
• Construction - Door and window seals

FLK-II915 Imager Features and Specifications

Key Specs

• Frequency Range: 2 to 100 kHz
• Operation Distance: Up to 120 meters (393 feet)
  Depending on ambient conditions
• Field-of-View (FOV): 63± 5 Degrees
• Nominal Frame Rate: 25 FPS (frames per second)
• Resolution: 5.0 MP (megapixels)
• Zoom: 3 x digital zoom
• Touchscreen: Capacitive
• Display: 7-inch LCD with backlight, sunlight readable
• Memory/Storage Capacity: 32 GB
• Image Format: Blended visual and SoundMap .JPG or .PNG
• Video Format: Blended visual and SoundMap .MP4
• Save Video: Up to 5 minutes
• Interface: USB-C for data transfer
• Connectivity: Wi-Fi enabled




Acoustic Measurements Range:

• 12.1 to 114.6 dB SPL (± 1 dB SPL 2 kHz)
• 4.4 to 101.2 dB SPL (± 2 dB SPL 19 kHz)
• 12.8 to 119.2 dB SPL (± 1 dB SPL 35 kHz)
• 19.8 to 116.1 dB SPL (± 3 dB SPL 52 kHz)
• 41.4 to 129.0 dB SPL (± 1 dB SPL 80 kHz)
• 54.4 to 135.5 dB SPL (± 1 dB SPL 100 kHz)




More Highlights:

• Improved leak rate quantification
• LeakQ - Leak size scale, leak rate, and leak cost estimation
• PDQ Mode - Translates the sound of partial discharge into visuals
• MecQ - Enables efficient scanning of large areas
• Automatic capture upload to Fluke Connect Desktop via Cloud
• New improved ii-Series reporting platform
• On-device real time data
• Customizable profiles for different inspection types
• Stay powered all day with six hours of operating time

Reduce Downtime And Locate Leaks Visually

The all-in-one tool you have been looking for to visualize leaks, partial discharge, and mechanical issues. The ii915 Acoustic Imager empowers technicians with the ability to visualize sound while inspecting hoses, fittings, and connections for leaks. It comes equipped with an acoustic array composed of minute, highly sensitive microphones that produce a range of decibel levels for each frequency. Utilizing this data, an algorithm generates a sonic image, termed as SoundMap, which is overlaid on a visual image. The SoundMap adjusts automatically based on the chosen frequency level, effectively eliminating background noise. This makes the detection of compressed gas leaks remarkably straightforward.

First-Line Inspection to Locate Potential Mechanical Issues Early

The Fluke ii915 equipped with MecQ is revolutionizing the industry by facilitating effective scanning of expansive areas, identifying and recording potential problems for focused maintenance. Its non-contact scanning and sophisticated noise reduction capabilities make the Fluke ii915 Acoustic Imager with MecQ Mode a safe choice that provides sharp images even in environments with high noise levels. By identifying potential issues at an early stage, it gives users peace of mind and allows them to take preventative actions to avoid expensive complications, thus outperforming conventional methods.

Partial Discharge: The Invisible Threat…Now You Can See

Partial discharge, a critical problem that can result in arc flash fires, power outages, explosions, and risk to human life, is now a detectable hazard. Whether your task involves examining insulators, transformers, switch gears, or high-voltage power lines, the Fluke ii915 Acoustic Imager with PDQ Mode is your proactive instrument. This device, crafted for high-voltage electricians, electrical testing engineers, and grid maintenance crews, converts the sound of partial discharge into visual data that identifies the exact location. With a broad frequency range of 2-100 kHz, the ii915 facilitates the early identification of potential issues, enabling you to schedule maintenance and avert disastrous incidents.

ii Series Acoustic Imagers

Most manufacturers are aware of the existence of leaks in compressed air, gas, steam, and vacuum systems, but dealing with them has been a long and tiresome process. However, with the Fluke ii Series and a little bit of training, your maintenance staff can start looking for leaks as part of their regular maintenance schedule, even during the busiest operational hours. The ii Series Acoustic Imagers allow technicians to visualize sound as they examine hoses, fittings, and connections for leaks. The device’s integrated acoustic array, composed of numerous sensitive microphones, produces a range of decibel levels for each frequency.

What's in the Box

• Sound Beacon Unit:
  • 9 V Battery
  • Soft Case
  • Accessory 1 inch probe
  • Instruction Sheet, and Warranty Card

• 1X ii915 Main Body:
  • 1X Hand Strap
  • 2X Sensor Array Cover
  • 1X Sensor Array
  • 1X Neckstrap
  • 1X USB-C Cable
  • 1X BP291
  • 1X Battery Charger
  • 1X EDBC290
  • 1X Connector set
  • 1X Hard Case
  • 1X Guide, Safety Info
  • 1-Year Standard Fluke Premium Care