FLUKE-87V/PRV240 Fluke-87V DMM +Prv240 Proving Unit Kit

87V Industrial Multimeter Overview:

The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment - even in loud, high-energy, and high-altitude locations. The 87V is designed so you can work more efficiently.

• Easy-access door for fast battery changes without breaking the calibration seal
• Analog bar graph for fast changing or unstable signals
• Large digit display with bright, two-level backlight for easier reading in low light
• Touch Hold keeps readings on display even after removing probes
• The 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pass filter. The meter also captures intermittents as fast as 250 µS using Peak Capture. High-frequency, high-energy noise generated by large drive systems is blocked from your measurements with specially designed shielding.

All the inputs in the 87V are updated to the third edition of the EN 61010-1 to CAT III 1000 V and CAT IV 600 V. The meter is designed to withstand spikes of more than 8000 V. You also benefit from an audible Input Alert warning if the test leads are placed in the incorrect input jacks for the measurement being made.

PRV240 Proving Unit Overview:

The Fluke PRV240 Proving Unit is a portable, pocket-sized, battery-powered voltage source. It is unique because it sources stable AC and DC voltages for both LoZ and HiZ instruments.

The Fluke PRV240 provides a safe method to verify that your electrical test tool is operating properly before and after you conduct any live tests. The concept of “Test Before Touch” (TBT) involves testing your meter against a known live source before and after the actual measurement. This sequence verifies that your test tool is operating properly through the actual measurement.

A single LED on the PRV240 indicates functionality, making this unit a simple-to-use solution for complying with TBT verification of your test tool. Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact. The proving unit also offers:

• Long battery life—5,000 tests per set of four AA batteries
• Designed for safety and compliance
• Using the PRV240 reduces the need for personal protective equipment (PPE) when a known voltage source is not available for verification of your tester or multimeter, so a TBT is performed. PPE is still needed for absence of voltage testing when appropriate